Pax Guitar Saw - Fret Saw - 16tpi slick The Robert Sorby Slick is

The Robert Sorby Slick is a specialist chisel designed for the timber framer and boat builder

Henry Taylor carvng gouge 'sweep no 7' or '3707' from the professional series

5mm thicker than most bench plane blades

The miniature Veritas router plane is 75mm wide and comes complete with a 3

Secondary Cutter Edge: 30 degrees

Pax Guitar Saw - Fret Saw - 16tpi slick The Robert Sorby Slick isA Pax Guitar Saw by Thomas Flinn. This saw is used for cutting frets on a guitar. The saw has an alloy steel bade with a brass back and a rich walnut handle. The blade has the Pax etching inline with traditional saws. This saw forms part of the Pax range. Packed individually in a blister pack. Blade Length: 10 inches Teeth Per Inch: 16tpi Kerf: 0. 021" Tool Manufacturer: Thomas Flinn (Sheffield, England)